 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DC/DC Converters TES 5 Series, 5 Watt compliant RoHS Features Compact low Profile SMD Package Wide 2: Input Voltage Range I/O Isolation 500VDC Operating Temp. Range -40C to 85C max. Short Circuit Protection Remote On/Off High Accuracy of Pin Co-Planarity Lead free Design - RoHS compliant 3 Years Product Warranty UL 60950-1 The TES-5 series is a new range of high performance 5W dc-dc converter modules in low profile SMD package with compact dimensions of only 33.4 x 20.6 x 10.2 mm. The 18 available models feature wide 2:1 input voltage range and tightly regulated output voltage. High efficiency allows operating temperatures up to 71C at full load. Further features are built-in EMI-filter to meet EN 55022,class A and FCC, level A without additional components and remote On/Off control. The products are qualified for soldering in a high temperature lead-free reflow solder process. Typical applications for these converters are battery powered equipment, instrumentation, communication systems and industrial controls. Models Ordercode TES 5-20 TES 5-2 TES 5-22 TES 5-23 TES 5-22 TES 5-222 TES 5-223 TES 5-240 TES 5-24 TES 5-242 TES 5-243 TES 5-242 TES 5-2422 TES 5-2423 TES 5-480 TES 5-48 TES 5-482 TES 5-483 TES 5-482 TES 5-4822 TES 5-4823 http://www.tracopower.com 36 - 75 VDC (48 VDC nominal) 8 - 36 VDC (24 VDC nominal) 9 - 8 VDC (12 VDC nominal) Input voltage range Output voltage 3.3 VDC 5 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC Output current max. 1200 mA 1000 mA 420 mA 335 mA 500 mA 210 mA 165 mA 1200 mA 1000 mA 420 mA 335 mA 500 mA 210 mA 165 mA 1200 mA 1000 mA 420 mA 335 mA 500 mA 210 mA 165 mA Efficiency typ. 76 % 80 % 83 % 83 % 80 % 83 % 83 % 78 % 82 % 85 % 85 % 82 % 85 % 85 % 78 % 82 % 85 % 85 % 82 % 85 % 85 % Page of 3 DC/DC Converters TES 5 Series Input Specifications Input current no load 12 Vin models 20 mA 24 Vin models 5 mA 48 Vin models 3 mA 12 Vin models 500 mA typ. 24 Vin models 250 mA typ. 48 Vin models 125 mA typ. 12 Vin models 8 VDC / 7 VDC typ. 24 Vin models 16 VDC / 15 VDC typ. 48 Vin models 33 VDC / 31 VDC typ. 12 Vin models 25 V max. 24 Vin models 50 V max. 48 Vin models 100 V max. 1.0 A max. EN 55022 level A, FCC part 15, class A 1% - Input variation Vin min. to Vin max. 0.3 % max. - Load variation 20 - 100 % single output models 1 % max. dual output models balanced load 2 % max. 85 mVpk-pk max. 0.02 % / C >115 % of Iout max., constant current indefinite, automatic recovery single output models 680 F max. dual output models 100 F max. (esch output) - Operating - Case temperature - Storage - 40C ... + 85 C + 100C max. - 40C ... + 125 C 3.5%/K above 70C 95 % rel H max. >1 Mio. h @ + 25 C 1'500 VDC 650 pF typ. >1`000 MOhm 260 kHz typ. UL 60950-1 , IEC 60950-1, EN 60950-1 CSA (pending) - On: - Off: - Off idle current: 2.5 ... 5.5 VDC or open circuit -0.7 ... 0.8 VDC or short circuit pin 1 and 2(/3) 10 mA - Input/Output - Input/Output - Input/Output (500 VDC) 5 Watt Input current full load Start-up voltage / under voltage shut down Surge voltage (1 sec. max.) Reverse voltage protection Conducted noise (input) Output Specifications Voltage set accuracy Regulation Ripple and noise (20 MHz Bandwidth) Temperature coefficient Output current limitation Short circuit protection Capacitive load General Specifications Temperature ranges Derating Humidity (non condensing) Reliability, calculated MTBF (MIL-HDBK-217F ground benign) Isolation voltage (60sec.) Isolation capacity Isolation resistance Switching frequency Safety standards Safety approvals Remote On/Off All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TES 5 Series Physical Specifications Case material Potting material Weight Reflow soldering profile non conductive plastic epoxy (UL 94V-0 rated) 14 g (0.55 oz) as per IPC/JEDEC J-STD-020C peak temp. 245C (+0C) for 20sec. max. 5 Watt Outline Dimensions 33.4 (1.31) S Seating Plane Detail A Pin-Out Pin 2 3 Single -Vin (GND) -Vin (GND) No con. No con. No con. No con. No con. +Vout No con. -Vout +Vin (Vcc) +Vin (Vcc) No con. Dual -Vin (GND) -Vin (GND) Common No con. -Vout No con. No con. +Vout No con. Common +Vin (Vcc) +Vin (Vcc) No con. Remote On/Off Remote On/Off 10.2 (0.40) (0.016) 0.4 20.6 (0.81) 22.6 (0.89) 25.6 (1.01) 13 9 0 2 3 4 5 6 22 0.15 24 Detail A Top View 1. (0 .0 6) 5 23 24 1 12 2.7 (0.11) 15.24 (0.6) 2.54 (0.1) 1.5 (0.06) (0.006) 0.15 Pin Patterns: 2 x 2.54 (2 x 0.1) Dimensions in [mm], () = Inch Tolerances 0.25 (0.02) Pin pich tolerances 0.13 (0.005) 15.24 (0.6) 3 x 2.54 (3 x 0.1) 27.0 (1.06) 2.7 (0.11) 1.9 (0.059) (0.12) Specifications can be changed any time without notice Rev. 02/07 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41 43 311 45 11 * Fax +41 43 311 45 45 * info@traco.ch * www.tracopower.com 3.0 Page 3 of 3 |
Price & Availability of TES5-1210
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |